Excavator Ripper Specification:
| Model/ Description | YTCT06R | YTCT08R | YTCT10R | YTCT17R | YTCT20R | YTCT |
|
Pin to Pin Distance (mm) |
390 | 465 | 515 | 550 | 575 |
OEM ODM |
|
Overall Length (mm) |
540 | 665 | 735 | 800 | 825 |
OEM ODM |
|
Overall Width (mm) |
890 | 1245 | 1370 | 1530 | 1550 |
OEM ODM |
|
Pin Diameter (mm) |
55-65 | 70-80 | 80-90 | 90-100 | 100-120 |
OEM ODM |
|
Total Weight (kg) |
120-150 | 210-250 | 350-410 | 520-600 | 650-750 |
OEM ODM |
|
Suitable Excavator (ton) |
11-15 | 16-23 | 23-30 | 31-40 | 41-50 |
OEM ODM |
* The Parameter above may change with the technology improvement, will not notice additionally, please understand.
Introduction:
The excavator ripper is a changeable working device with the function of crushing and turning loose.
Excavator Ripper Type:
Generally single tooth, there are two teeth or three teeth, digging cut force is strong.
A whole cast loose soil teeth, upper ear holes, respectively and bucket rod and bucket cylinder is hinged, tooth tip front end has a hard alloy surfacing tooth cap, when the piston rod of the hydraulic cylinder is extended, push the tooth tip forced insertion and turning the soil.
Ripper Application:
It is used to excavate cracked rock, break frozen soil, and dig up asphalt pavement. It is suitable for crushing and splitting of hard soil, subhard stone and wind fossil, so as to excavate and load with bucket.
Excavator Ripper Suitable Working Condition:
· Suitable for high strength steel plate manufacturing, easy installation, convenient application.
· It is suitable for loose hard soil layer, frozen soil layer, soft stone, weathered rock and other hard materials, which is convenient for later operation.
· It is an effective and convenient non-blasting excavation construction scheme.
