OEM Single Tooth Ripper For Excavator Stump Ripper 540mm Length

Factory Supply Excavator Ripper with OEM Tooth 

Excavator Ripper Introduction
An integrally cast ripper tooth with ear holes on the upper part is hinged to the bucket rod and bucket cylinder respectively. The front end of the tooth tip has a hard alloy surfacing tooth cap. 

Excavator Ripper Parameter

Product specification: can produce excavator ripper for 0.8-60 ton Carrier, excavator ripper weight

* The Parameter above may change with the technology improvement, will not notice additionally, please understand.

Rock Ripper Application 

• Crushing of hard soil, sub-hard stone, and weathered stone is convenient for bucket excavation and loading. Generally, it is a single tooth, and there are also two or three teeth, and the digging and cutting ability is strong.
• It is suitable for the crushing and splitting of hard soil, sub-hard stone, and weathered stone, so as to facilitate excavation and loading operations with buckets.
• It is used for excavating cracked rock, breaking frozen soil, and also for excavating asphalt pavement.
• Loose operations in the hard hard soil layer, frozen soil layer, soft stone, weathered stone, and other geological

Chengtai Excavator Ripper Features

• Suitable for Q345 manganese plate steel, high strength, and corrosion resistance.
• Tear up rock, pavement, or frozen ground by concentrating all of your excavator's power in a small area.
• Achieve deep penetration and the ability to easily crush tough materials.
• Heavy-duty models with additional wear parts are available.
• Add a steel Side Protector blade to the protector ripper to prevent fracture and breaking.