Vibrating Plate Compactor for PC-200 Excavator Made by YAKAI
Production Introduction
Hydraulic Plate Compactor, also known as rammed compactor, consists of four essential components, hydraulic motor, eccentric mechanism, rubber, and bottom plate.
Excavator Hydraulic Compactor Working Theory
A hydraulic compactor uses a hydraulic motor to drive the eccentric mechanism to rotate, and the vibration generated by the rotation acts on the material that needed to be compacted flat through the bottom plate to make it compact.
Application:
1) The use of rammed slope pavement construction
2) Use of rammed foundation buildings
3) Use of rammed soil, gravel, etc.
4) The use of a rammed slope bank
5) The use of bottom soil in the construction of rammed pipelines
6) The use of rammed drainage pipes and rock bases
7) Use of test pile work
Plate Compactors Advantages:
Hydraulic compaction has the characteristics of lightweight, convenient operation, flexibility, and good compaction effect.
1) Strong tamping ability and high reliability:
has a high-frequency impact of 2000 times per minute
2) Components and Advanced Design:
Hydraulic compactors maintain high reliability and low operating costs even in harsh conditions. Reinforced steel construction and strong rubber bumpers allow the machine to exert great tamping power without damaging itself due to recoil. The eccentric shock mechanism is driven by a durable motor, lubricated bearings, and an integrated hydraulic control valve to protect the motor from accidental damage
3) High versatility:
There is a high degree of versatility between the hydraulic rammer and breaker product lines and can be equipped with various types of excavators.
4) Easy to install and widely used:
Hydraulic rammers are very quick to install, far superior to hand-push rammers, and in many situations where hand-push rammers cannot work, such as deep trenches or steep slopes, In some ditch operations, if the conditions are limited to work on one side, the hydraulic rammer can also be installed perpendicular to the bucket to meet the needs.
Specification
| Category | Unit | YTCT- mini | YTCT 02 | YTCT 04 | YTCT 06 | YTCT 08 | YTCT 10 |
|
Height |
mm | 490 | 550 | 750 | 930 | 1000 | 1100 |
| Width | mm | 320 | 410 | 550 | 700 | 900 | 900 |
| Impulse Force | ton | 2 | 2.5 | 4 | 6.5 | 11 | 15 |
| Vibration Frequency | rpm | 1800 | 1800 | 2000 | 2000 | 2200 | 2200 |
| Oil Flow | I/min | 25-35 | 35-45 | 45-85 | 85-105 | 120-170 | 120-170 |
| Working Pressure | kg/cm^2 | 90-110 | 90-110 | 100-130 | 100-150 | 150-200 | 150-200 |
| Bottom Measurement | mm | 500*350 | 630*400 | 900*550 | 1160*700 | 1350*900 | 1500*1000 |
| Compactor Weight | kg | 350-450 | 450-550 | 550-600 | 750-850 | 900-1000 | 1100-1300 |
|
Suitable Carrier Weight |
ton | 1-2 | 3-5 | 6-10 | 11-17 | 18-27 | 30-40 |
* The Parameter above may change with the technology improvement, will not notice additionally, please understand.
