BMP 250-800 Attachments Hydraulic Side Type Breaker Hammer Medium DutyRock Hammer For Excavator
Side Type Breaker Technical Parameter
| Silent Type Rock Breaker Parameter Chart | ||||||||
| Model |
Body Weight (incl. chisel tool) (kg) |
Total Weight (kg) |
Size (L*W*H) (mm) |
Working Oil Flow (I/min) |
Hydraulic Pressure (kg/cm^2) |
Blow Frequency (bmp) |
Chisel Diameter (mm) |
Carrier Weight (ton) |
|
Rock Drill Breaker for Mini Excavator |
||||||||
| YTCT05 | 60 | 95 | 990*235*255 | 15-20 | 80-110 | 850-1350 | 35 | 0.8-1 |
| YTCT10 | 68 | 100 | 1030*240*265 | 20-30 | 90-120 | 800-1300 | 40 | 0.8-1.5 |
|
Hydraulic Breaker for Light Weight Excavator |
||||||||
| YTCT20 | 71 | 129 | 1331*260*265 | 20-30 | 90-120 | 700-1200 | 45 | 1.2-3.0 |
| YTCT30 | 89 | 155 | 1417*350*305 | 25-50 | 90-120 | 600-1100 | 53 | 2.5-4.5 |
| YTCT40 | 156 | 361 | 1660*328*486 | 40-70 | 110-140 | 500-900 | 68 | 4-7 |
| YTCT43 | 214 | 450 | 1712*328*486 | 50-90 | 120-150 | 400-800 | 75 | 6-9 |
| YTCT50 | 479 | 1007 | 2345*440*570 | 80-110 | 150-170 | 350-700 | 100 | 10-15 |
|
Rock Breaker for Medium Duty Carrier |
||||||||
| YTCT70 | 850 | 1898 | 2847*560*710 | 130-150 | 160-180 | 400-800 | 135 | 18-26 |
| YTCT81 | 920 | 2004 | 2793*560*710 | 120-180 | 160-180 | 350-500 | 140 | 18-26 |
| YTCT81A | 956 | 2042 | 2793*560*710 | 120-180 | 160-180 | 350-500 | 140 | 18-26 |
| YTCT100 | 1092 | 2457 | 3002*640*760 | 150-190 | 160-180 | 350-700 | 150 | 27-35 |
| DY121 | 1313 | 2968 | 3075*640*760 | 180-240 | 160-180 | 300-450 | 155 | 28-35 |
|
Hydraulic Hammer for Heavy Duty Excavators |
||||||||
| YTCT131 | 1442 | 2916 | 3337*654*840 | 200-260 | 160-180 | 250-400 | 165 | 30-45 |
| YTCT140 | 1590 | 3116 | 3541*664*875 | 200-260 | 160-180 | 250-380 | 165 | 30-45 |
| YTCT151 | 1925 | 3906 | 3723*670*920 | 210-290 | 160-180 | 200-350 | 175 | 40-55 |
* The Parameter above may change with the technology improvement, will not notice additionally, please understand.
The Methods of Using the Excavator Hydraulic Breaker
1. Visual inspection before operation of the breaker
2. Lubrication before/during the operation of the breaker
3. Appropriate breakdown force should be used during crushing operation
4. During the operation of the breaker, keep a 90° angle with the material
5. The breaker can strike at one action point for up to 30 seconds during the breaking operation.
6. Do not use the hammer steel drill as a pry bar
7. Empty strike is strictly prohibited during the operation of the breaker
8. It is strictly forbidden to use the breaker for hoisting operations
