HB Series Top Type Breaker Specification - Standard Furukawa Series
| Furukawa Series Rock Drill Breaker Parameter Chart | ||||||
| Model |
Body Weight (incl. chisel tool) (kg) |
Working Oil Flow (I/min) |
Hydraulic Pressure (kg/cm^2) |
Blow Frequency (bmp) |
Chisel Diameter (mm) |
Carrier Weight (ton) |
|
Furukawa |
||||||
| HB15G | 1050 | 100-160 | 150-180 | 450-600 | 120 | 12-19 |
| HB20G | 1760 | 125-200 | 160-180 | 350-850 | 135 | 20-27 |
| HB30G | 2200 | 160-190 | 170-190 | 300-800 | 150 | 28-36 |
| HB40G | 2650 | 190-250 | 170-190 | 300-750 | 160 | 37-50 |
* The Parameter above may change with the technology improvement, will not notice additionally, please understand.
The Correct Way to Use The Hydraulic Rock Hammer
1. The drill rod is perpendicular to the striking surface, and the drill rod is compacted (oblique hitting can easily cause the drill rod to break and damage the cylinder body. If the drill rod is not compacted, it will cause damage to the cylinder body).
2. The engine should be warmed up for ten minutes before the crushing operation, especially in winter, which will help the operation go smoothly; before crushing, visually check whether each oil pipe leaks oil, deal with the oil leakage in time, and check whether the oil seal of the breaker leaks oil If the oil leaks, the oil seal should be replaced in time, otherwise the dust will enter the piston and wear the piston.
Applicable Field
1.Mining
2.Metallurgy
3.Road
4.Railway
5.Construction
6.Ship reparing
7.Others
